Lobe Maintenance Products

July 16, 2013

VapoLobe
Daily Cleaner

VapoLobe

Use
Cleans hearing aids and reduces the risk of ear canal infection while helping to keep repair costs down.

Directions
Spray the VapoLobe solution on a tissue and gently wipe each hearing aid’s earmold, shell or dome. Can also be used to clean protective ear wear (e.g. earplugs for musicians, swimmers, etc.).

ServiLobe
Daily Cleaning and Disinfectant Towelettes

ServiLobeUse
Cleans hearing aids and reduces the risk of ear canal infection while helping keep repair costs down.

Directions
Take a packet from the ServiLobe box and open it to remove the towelette. Carefully wipe the earmold, shell or dome of your hearing aid. Can also be used to clean protective ear wear (e.g. earplugs for musicians, swimmers, etc.).

IntraLobe
Deep Cleaner

IntraLobeUse
Deep cleans earmolds.

Directions
Light pressure is all that’s needed to wet the brush. Apply the cleaner to the earmold and brush lightly until the product has evaporated.

ProtecLobe
Nightly Protector for Everyday Care

ProtectLobeUse
Eliminates excess moisture, which is the main cause of hearing aids malfunction.

Directions
Open the battery compartment, remove the battery and place hearing aids in the ProtecLobe container.

The ProtecLobe tablet must be replaced every three months. Tip: write the date on the tablet.

TestLobe
Battery Tester

TestLobeUse
Immediately indicates whether your battery is still good or needs replacing.

Directions
Insert the battery into the TestLobe tester. Slide the battery over the gold-coloured part of the tester, being sure to keep the “+” side upwards.

The result:
Pile bonne ou Pile bonne : Pile bonne
Pile à changer ou Pile à changer : Pile à changer

SoluLobe
Effervescent Tablets for Earmolds

SoluLobeUse
Deep cleans and disinfects earmolds.

Directions
Fill the container with warm water and drop in a tablet. Disconnect the earmolds from the hearing aids and place them in the container. Soak for several hours or overnight. Rinse with clean water. Dry with VentiLobe.

VentiLobe
Air Blower for Earmolds

VentiLobeUse
Eliminates moisture from earmold tubes.

Directions
Disconnect the earmolds from the hearing aids. Insert the air blower tip into the tube and squeeze until all moisture or condensation is gone.

InserLobe
Lubricating Gel

InserLobeUse
Makes hearing aid insertion easier.

Directions
Apply a small amount of InserLobe lubricating gel on the earmold or in-the-canal part of the shell. Avoid getting gel on the receiver and microphone.